====== Bumblebee ======
Bumblebee ist unser Staubsaugeroboter. Es handelt sich um einen //[[https://de.dreametech.com/products/dreame-z10-pro|Dreame Z10 Pro]]// inklusive Basiststation.

Er ist unter [[http://bumblebee.nobreakspace.org|bumblebee.nobreakspace.org]] zu finden. Auf dem Ronoter läuft die Firmware [[https://builder.dontvacuum.me/|DustBuilder]] und zur Steuerung [[https://valetudo.cloud/|Valetudo]].

Auf dem Staubsauer läuft ein //Athena Linux//.

==== Hardware ====

==== OpenHab Integration===
TBD.

==== The Sound fo Bumblebee ====
^ Song ^ Nº ^ Meaning ^
| Non,je ne regrette rien | 13 | returning to the dock to charge |
| I'll be missing you | 34 | dustbin not installed. Please install it. |
|   | 45 | I am here |
|   | 47 | start charging |
=== Original sounds ===
  * **0** Klavierintro (Startup)
  * **1** Waiting for the network configuration
  * **2** Unable to connect to the wife network. Please check Wi-Fi password and try again later
  * **3** Unable to connect to the server. Please check the local network and try again, later
  * **4** Robot has exited network configuration mode
  * **5** Network connected successfully
  * **6** Network connection failed. Please try again later.
  * **7** Start Cleaning
  * **8** Start spot cleaning
  * **9** start scheduled cleaning
  * **10** Start resuming cleaning
  * **11** Paused
  * **12** Cleaning tasks completed
  * **13** Returning to the dock to charge
  * **14** Low battery. Returning to the dock to charge. Robot will resume working after charging.
  * **17** Please move Robot to the dock to charge.
  * **18** Charging
  * **19** Please move Robot from the dock before turning it off.
  * **20** Low battery
  * **21** Low battery. Robot will turn off.
  * **22** Please move Robot to an area that needs to be cleaned
  * **23** Water tank has been installed
  * **24** Please check, whether water tank  has been installed properly
  * **25** Low battery. Unable to carry out the scheduled clean-up
  * **26** Restoring to factory settings
  * **27** Updating. Taking about five minutes. Do not turn off nor start a cleaning task.
  * **28** Updated successfully.
  * **29** Update failed. Please try again later
  * **30** Positioning. Please wait.
  * **31** Positioning failed. Map is invalid
  * **33** visual navigation sensor error. Please wipe it clean and restart.
  * **34** dustbin not installed. Please install it.
  * **35** Main brush error. Please check and clean it
  * **36** sidebrush error. Please check and clean it.
  * **37** right wheel error. Please check and clean it.
  * **38** left wheel error. Please check and clean it.
  * **39** Please clean cliff sensor
  * **40** Robot stuck. Please move it to a new position to restart.
  * **41** Robots wheels suspended. Please move Robot back on the ground.
  * **42** Please check and clean Filter
  * **43** Bumper error. Please gently tap, to see if it rebounds.
  * **44** error. Please check the user manual or contact customer service
  * **45** I am here
  * **46** Robot and Phone connected. Please return to the app to wait for the result
  * **47** start charging
  * **48** Low Battery. Returning to the dock.
  * **49** High intensity magnetic field detected. Please move Robot away and restart.
  * **50** Charging error. Please clean charging contacts.
  * **51** Battery over heating or over cooling. Please wait until the batteries' temperature returns to normal. Then continue to use.
  * **52** Robot tilted. Please put it on a level ground to restart.
  * **53** Virtual no go zone detected. Please move Robot away and restart.
  * **54** Positioning succeeded. Resuming cleaning.
  * **55** Positioning succeeded. Resuming returning to the dock.
  * **56** Start selected room cleaning.
  * **57** Start zoned cleaning.
  * **58** Proceed with cleaning task
  * **59** mopping completed. Please remove water tank timely.
  * **60** Optical flow sensor error. Please wipe the optical flow sensor clean and restart.
  * **61** Start mopping
  * **62** Start remote control cleaning
  * **63** Water tank has been removed
  * **64** Positioning failed. Map is invalid. Robot will return to dock.
  * **65** Resume returning to the dock.
  * **66** Filter worn out, please replace it timely.
  * **67** Side brush worn out, please replace it timely.
  * **68** Main brush worn out, please replace it timely.
  * **69** Clean-up path blocked. Please move Robot to a new position, to restart.
  * **70** Please remove and clean mop pad.
  * **71** Please check, whether laser distance sensor cover is jammed.
  * **72** Edge sensor error. Please check and clean it.
  * **75** Filter may not be dry, or may be blocked.
  * **77** Please start Robot in none carpet area.
  * **78** Please clean 3D-optical-avoidance-sensor.
  * **79** 3D-optical-avoidance-sensor error. Please restart Robot or contact customer service.
  * **81** Ultra-sonic-sensor Error. Please restart Robot or contact customer service.
  * **82** Start mapping.
  * **83** Proceed with mapping.
  * **84** Mapping completed.
  * **85** Positioning succeeded. Proceeding with mapping.
  * **86** Positioning failed. Restarting Mapping.
  * **87** Low Battery. Returning to the dock.
  * **88** Enter Remote control mode.
  * **89** Resume recharging
  * **90** Proceed with cleaning task.
  * **101** auto empty bags cover not closed or dust collection bag not installed. Please close the cover or install the bag. 
  * **102** dust collection bag full or air ducts blocked. Please replace the bag or clean the air duct timely.
  * **105** start cleaning
  * **110** start auto-empty
  * **116** child lock on, buttons locked
  * **117** child lock off, buttons unlocked
  * **118** buttons locked. Press and hold the dock button to unlock
  * **119** buttons locked
  * **120** buttons unlocked
  * **121** the robot and the phone are connected. Please return to the fantic app and wait for the network connection to complete
  * **122** continuous positioning, please wait
  * **200** Klavier outro