Benutzer-Werkzeuge

Webseiten-Werkzeuge


hackspace:infrastruktur:iot:bumblebee

Bumblebee

Bumblebee ist unser Staubsaugeroboter. Es handelt sich um einen Dreame Z10 Pro inklusive Basiststation.

Er ist unter bumblebee.nobreakspace.org zu finden. Auf dem Roboter läuft die Firmware DustBuilder und zur Steuerung Valetudo.

Auf dem Staubsauer läuft ein Athena Linux.

Hardware

OpenHab Integration

TBD.

Original sounds

  • 0 Klavierintro (Startup)
  • 1 Waiting for the network configuration
  • 2 Unable to connect to the wife network. Please check Wi-Fi password and try again later
  • 3 Unable to connect to the server. Please check the local network and try again, later
  • 4 Robot has exited network configuration mode
  • 5 Network connected successfully
  • 6 Network connection failed. Please try again later.
  • 7 Start Cleaning
  • 8 Start spot cleaning
  • 9 start scheduled cleaning
  • 10 Start resuming cleaning
  • 11 Paused
  • 12 Cleaning tasks completed
  • 13 Returning to the dock to charge
  • 14 Low battery. Returning to the dock to charge. Robot will resume working after charging.
  • 17 Please move Robot to the dock to charge.
  • 18 Charging
  • 19 Please move Robot from the dock before turning it off.
  • 20 Low battery
  • 21 Low battery. Robot will turn off.
  • 22 Please move Robot to an area that needs to be cleaned
  • 23 Water tank has been installed
  • 24 Please check, whether water tank has been installed properly
  • 25 Low battery. Unable to carry out the scheduled clean-up
  • 26 Restoring to factory settings
  • 27 Updating. Taking about five minutes. Do not turn off nor start a cleaning task.
  • 28 Updated successfully.
  • 29 Update failed. Please try again later
  • 30 Positioning. Please wait.
  • 31 Positioning failed. Map is invalid
  • 33 visual navigation sensor error. Please wipe it clean and restart.
  • 34 dustbin not installed. Please install it.
  • 35 Main brush error. Please check and clean it
  • 36 sidebrush error. Please check and clean it.
  • 37 right wheel error. Please check and clean it.
  • 38 left wheel error. Please check and clean it.
  • 39 Please clean cliff sensor
  • 40 Robot stuck. Please move it to a new position to restart.
  • 41 Robots wheels suspended. Please move Robot back on the ground.
  • 42 Please check and clean Filter
  • 43 Bumper error. Please gently tap, to see if it rebounds.
  • 44 error. Please check the user manual or contact customer service
  • 45 I am here
  • 46 Robot and Phone connected. Please return to the app to wait for the result
  • 47 start charging
  • 48 Low Battery. Returning to the dock.
  • 49 High intensity magnetic field detected. Please move Robot away and restart.
  • 50 Charging error. Please clean charging contacts.
  • 51 Battery over heating or over cooling. Please wait until the batteries' temperature returns to normal. Then continue to use.
  • 52 Robot tilted. Please put it on a level ground to restart.
  • 53 Virtual no go zone detected. Please move Robot away and restart.
  • 54 Positioning succeeded. Resuming cleaning.
  • 55 Positioning succeeded. Resuming returning to the dock.
  • 56 Start selected room cleaning.
  • 57 Start zoned cleaning.
  • 58 Proceed with cleaning task
  • 59 mopping completed. Please remove water tank timely.
  • 60 Optical flow sensor error. Please wipe the optical flow sensor clean and restart.
  • 61 Start mopping
  • 62 Start remote control cleaning
  • 63 Water tank has been removed
  • 64 Positioning failed. Map is invalid. Robot will return to dock.
  • 65 Resume returning to the dock.
  • 66 Filter worn out, please replace it timely.
  • 67 Side brush worn out, please replace it timely.
  • 68 Main brush worn out, please replace it timely.
  • 69 Clean-up path blocked. Please move Robot to a new position, to restart.
  • 70 Please remove and clean mop pad.
  • 71 Please check, whether laser distance sensor cover is jammed.
  • 72 Edge sensor error. Please check and clean it.
  • 75 Filter may not be dry, or may be blocked.
  • 77 Please start Robot in none carpet area.
  • 78 Please clean 3D-optical-avoidance-sensor.
  • 79 3D-optical-avoidance-sensor error. Please restart Robot or contact customer service.
  • 81 Ultra-sonic-sensor Error. Please restart Robot or contact customer service.
  • 82 Start mapping.
  • 83 Proceed with mapping.
  • 84 Mapping completed.
  • 85 Positioning succeeded. Proceeding with mapping.
  • 86 Positioning failed. Restarting Mapping.
  • 87 Low Battery. Returning to the dock.
  • 88 Enter Remote control mode.
  • 89 Resume recharging
  • 90 Proceed with cleaning task.
  • 101 auto empty bags cover not closed or dust collection bag not installed. Please close the cover or install the bag.
  • 102 dust collection bag full or air ducts blocked. Please replace the bag or clean the air duct timely.
  • 105 start cleaning
  • 110 start auto-empty
  • 116 child lock on, buttons locked
  • 117 child lock off, buttons unlocked
  • 118 buttons locked. Press and hold the dock button to unlock
  • 119 buttons locked
  • 120 buttons unlocked
  • 121 the robot and the phone are connected. Please return to the fantic app and wait for the network connection to complete
  • 122 continuous positioning, please wait
  • 200 Klavier outro
hackspace/infrastruktur/iot/bumblebee.txt · Zuletzt geändert: 18.06.2024 12:02 von Lukas Ruge